How it's done

Retention basin drain rebuilt at Aberdeen to prevent washouts

Washed-out retention basin drain at Perth Street, Aberdeen, with eroded banks and a water truck at the far end of the channel.
The retention basin drain on Perth Street, Aberdeen.

A badly eroded retention basin drain on Perth Street, Aberdeen, has been reshaped and rock-lined, with the water now slowed before it can strip the banks again.

The problem

Two drains met at one point in the basin, and the combined flow had washed out the channel. Erosion ran up the length of the drain. At the head of the drain, the headwall of the pipe that carries water under the road was about 95 per cent buried in silt. Drain cleaners had already tried to clear the pipe, but the silt kept building up behind it.

The work

1800 Mr Excavate estimated and managed the reconstruction. The overgrown channel was reshaped and the eroded banks rebuilt. Erosion control went into the base of the drain first, with geofabric laid under the rock.

Rock was then placed along the bottom of the channel. It forms a series of small dams that slow the water, so it no longer runs through as one fast flow, and the dams trap silt before it reaches the pipe under the road.

Why it matters

Drains that carry stormwater into a basin fail when fast water strips the banks and the silt it carries blocks the outlet. Reshaping the channel, protecting the base and slowing the flow addresses the cause. Cleaning out the pipe alone does not.

The job is an example of the drainage and erosion control work that 1800 Mr Excavate estimates and manages for councils, builders, developers and civil contractors across the Hunter Valley and regional NSW.

Watch the job

The project video, from the washed-out drain through to the finished rock-lined channel, is on the site remediation estimating page.

Need a drain, bank or site like this scoped and priced? Send an enquiry through the page or call 1800 673 922.

Back to the Newsroom